Battery Specifications Print
Modified on: Tue, 11 May, 2021 at 12:29 AM
Disclaimer: The information herein is not intended to replace the product’s User Manual. Please consult the User Manual for comprehensive information and cautionary guidance about the product’s operation and use.
Charging time at >=90%
About 75 minutes
About 1 hour while continuously scanning
At least 300 charges
In order to get maximum charging capacity with your Vscan Extend battery, you should initially allow the battery to be fully charged and then fully discharged at least three times. Perform normal operation during these cycles. Once the initial charging/ discharging cycles are performed, the following is applicable without reducing the lifetime of the battery:
- It is not necessary to completely discharge the battery before re-charging.
- It is possible to stop charging the battery before it is fully charged, but the battery will then be discharged more rapidly.
- It is possible to charge the battery several times each day, if needed.
When storing the Vscan Extend for a period longer than three months, remove the battery from the Vscan Extend main unit. Battery should be charged every 3 months for long term storage.
NOTE: Make sure to remove the battery from the device before shipping from one place to another.
Did you find it helpful?Send feedback