Disclaimer: The information herein is not intended to replace the product’s User Manual. Please consult the User Manual for comprehensive information and cautionary guidance about the product’s operation and use.


The sector probe is provided with an orientation mark. This mark is used to identify the end of the probe corresponding to the side of the image having the orientation V mark on the scanning screen.

 

Sector probe orientation

  1. Orientation marking on probe
  2. Orientation marking on screen

 

The dual probe is provided with an orientation mark and a green LED light. This mark and the LED light are identifying the orientation of the probe using the fixed symbol displayed on the screen. In the case of the dual probe, the LED light is also indicating which probe head is active.

 

Dual probe: Orientation mark, phased array active

  1. Orientation marking on probe
  2. Green LED light
  3. Orientation marking on screen


Dual probe: Orientation mark, linear array active

  1. Orientation marking on probe
  2. Green LED light
  3. Orientation marking on screen